Select Page

Outdoor CCTV Camera

Outdoor CCTV Camera 720P with 15m Night Vision

Our outdoor CCTV camera is a compact high-quality WiFi IP camera that can be mounted indoors or outdoors and is fully waterproof to IP67.  Designed to provide monitoring day or night with alerts for motion and infrared.  The EYE4 app available on Apple or Android provides alerts to your mobile phone and allows you to completely monitor your home via WiFi or a mobile connection.

Outdoor CCTV Camera

Complete support via Apple IOS, Android or Windows. Mount the camera on the top or bottom using the supplied stand.


  • IP67 waterproof, let your outdoor CCTV camera work normally during rainy days
  • H.264 compression format
  • 1.0MP 720P video resolution
  • Wireless network: WiFi IEEE 802.11 b/g/n
  • High image and video quality
  • 2pcs of IR LED, night vision range up to 15 metres
  • Support IR-CUT, provide clear picture
  • Alarm function: Motion detection, voice alarm, email alarm and FTP upload alarm
  • Support TF card, up to 64GB (not included)
  • Voltage range: 100 – 240V

Outdoor CCTV Camera Setup

The EYE4 app available on Apple or Android provides alerts to your mobile phone and allows you to completely monitor your home via WiFi or a mobile connection. One you have installed the EYE4 app it takes just 33 seconds for the camera to pair with your mobile device or tablet.

Monitoring and Altering

Surveillance camera alertingYou can setup the night vision camera to alert you of motion detection based on the arming schedule you setup.  In addition, you can configure the motion sensitivity adjusting the sensor so that you do not receive false notifications.  The Eye4 software alerts you via push direct to your mobile phone or you can receive email alerts.  The software all you to play back the surveillance footage directly from the camera to your phone.  The Eye4 software can also run on a Windows computer Windows 7 or higher is supported.  The Windows software also allows you to setup fixed IP addresses for the cameras to use.

Configuring the Outdoor CCTV Camera Please download the EYE4 app from the Android or Apple Store and register your details.
1. Once you had doe the above, connect your mobile phone to your home internet.
2. Open the EYE4 app locate “Device Management”, press the “+” button to right corner add a device.  Select IP camera and carry out instructions.  The outdoor CCTV Camera should now work via your mobile phone or tablet.
3. Under device management select your IP camera, press “Firmware” update the firmware if required.
4. If you want to know the IP address that the camera is using you will need to do the following:
4a. Go to the EYE4 app under “Device Management” select the CCTV camera at the top, under the name it will show you the MAC address, write this down.
4b. Login to your home router and under “DHCP” it will show a list of allocated addresses.   Look for the IP camera MAC address and this will show you the IP address the IP Camera is using.
4c. Write down the IP address and then type into a web browser you should be able to login to your camera and you can view/change the settings.
5. You can also install an app called TinyCam from Android or Apple store and from this you can also set up other features (this is not a free app or associated with the CCTV camera, but it does work).  The app enables you to set up a motion sensor mask and an alarm and can also record to your local device.

Outdoor CCTV Camera Size

Model: Outdoor CCTV Camera WiFi Specifications
  • Fashionable design
  • Discreet size
  • IP 67 rated waterproof
  • Night  vision
  • Motion detection
  • Visible SD-card slot.
System O.S Built in Linux
System security Three level user authority management
Online visitor Support 4 online visitors simultaneously
DDNS No need domain name, support dynamic IP.
Protocol ONVIF 2.4 protocol, high interoperability
Processor Hisilicon processor, built in ARM926 @Max. 440MHz and high-speed video co-processor
Reset Press 15s to reset back to factory default setting
Collection Image sensor 1/4inch 720p Progressive Scan CMOS
Sensor size 3.84mm*2.16mm
SNR ≥39dB
Minimum illumination 0.8Lux/F1.4(colorful model),0.3Lux/F1.(B&W mode)
Lens/View Angle 3.6mm@F1.4/56.14°
Night vision Dual IR-CUT Filter auto switch, 2pcs 850nmΦ28Mil LED, 15m IR distance
IR control IR turned on: night vision view enabled, infrared ray, ICR auto detect.
IR turned off: night vision disabled, infrared ray off, ICR stays in day view mode.
Video Compression format H.264 Main Profile/H.264 Baseline Profile/MJPEG/JPEG Baseline
Video coding Multi stream:720P/24fps+VGA/30fps+QVGA/30fps+720P @1fsJPEG  capture
Resolution 720p/VGA/QVGA
Bit Rate CBR/VBR, output bit rate range:128~4096kbps
Maximum frame rate 25fps
Image adjustment Brightness, Contrast, Saturation, Chromaticity  are adjustable
Network Port 10Mbps/100Mbps Adaptive/RJ45 port
WIFI WiFi802.11b/g/n
Memory Storage mode Local storage/Client storage
Port External Micro SD/TF card slot, no need disassemble to insert the SD card.
Alarm Detection Motion detection
Action Image E-mail/FTP image upload/mobile phone client
Physical index Rated voltage DC12/1A±0.3V
Power consumption Rated power:13W(IR opening )
Working environment Working temperature:-20~70?,working humidity :100%
Weight Gross weight: (note: in kind prevail)
Package size 176*166*110 MM(L*W*H)
Installation Wall mounted, drop ceiling, freely mounted bracket
IP Rating IP67 (Waterproof soak)
Note: Only for reference

Need help?

If you need help in trying to decide what sort of camera you will require, please call us on 0207 193 5760 or E-mail

Other cameras we supply that you might find useful: