Select Page

Night Time Surveillance Camera

Night Time Surveillance Camera 20m Night Vision, 1080P

Night time surveillance camera with 20m night vision and 1080P provides complete peace of mind when monitoring your home or office.  Connect via WiFi or wired RJ-45 Ethernet makes setting up and monitoring simple.  The high-quality 3MP lens provides 1080P resolution ensures night time surveillance is fully illuminated with the built-in infra-red so you can clearly see everything that is happening day or night in complete darkness.

Night Time Surveillance CameraThe night time surveillance camera detects motion and sends an alert to the phone app, email or NVR.  If you also install the micro-SD up to 128GB card it will automatically record to this and could provide 1 months of recording. The storage can also be set to loop so that it overwrites when full the oldest records first.  The monitoring can be scheduled throughout the week to ensure no false alarms occur.

Surveillance Camera Configuration

The camera can be added to your phone by simply downloading the EYE4 app from the Android or Apple store.  Register online, add the device and hold your phone over the camera, it takes just 33 seconds to pair with your WiFi network.  You should now see your night time surveillance camera on your phone.

WiFi IP Camera Setup

The EYE4 app available on Apple or Android provides alerts to your mobile phone and allows you to completely monitor your home via WiFi or a mobile connection. One you have installed the EYE4 app it takes just 33 seconds for the camera to pair with your mobile device or tablet.

Configuring the device Please download the EYE4 app from the Android or Apple Store and register your details.
1. Once you have done the above, connect your mobile phone to your home internet.
2. Open the EYE4 app locate “Device Management”, press the “+” button to right corner add a device, select IP camera and carry out instructions.  The camera should now work via your mobile phone or tablet.
3. Under device management select your IP camera, press “Firmware” update the firmware if required.
4. If you want to know the IP address that the camera is using you will need to do the following:
4a. Go to the EYE4 app under “Device Management” select the IP camera at the top, under the name it will show you the MAC address, write this down.
4b. Login to your home router and under “DHCP” it will show a list of allocated addresses.   Look for the IP camera MAC address and this will show you the IP address the IP camera is using.
4c. Write down the IP address and then type this into a web browser you should be able to login to your IP camera and you can view/change the settings.
5. You can also install an app called TinyCam from Android or Apple store and from this you can also set up other features (this is not a free app or associated with the doorbell, but it does work).  The app enables you to set up a motion sensor mask and an alarm and can also record to your local device.

Monitoring and altering

Surveillance camera alertingYou can setup the night time surveillance camera to alert you of motion detection based on the arming schedule you setup.  In addition, you can configure the motion sensitivity adjusting the sensor so that you do not receive false notifications.  The Eye4 software alerts you via push direct to your mobile phone or you can receive email alerts.  The software all you to play back the surveillance footage directly from the camera to your phone.  The Eye4 software can also run on a Windows computer Windows 7 or higher is supported.  The Windows software also allows you to setup fixed IP addresses for the cameras to use.




Night Time Surveillance Camera Technical Details

Model Night Time Surveillance Camera
  • H.264 compression format. 1080P high-resolution
  • 3.6mm lens. Night view distance is 20m
  • Support mobile phone background alarm push
  • ONVIF 2.4 protocol, support mainstream NVR
  • Support multi-stream output simultaneously
  • IP66
  • Support Windows, iPhone, iPad and Android phones & tablets
Category Type Parameters
System Online user Support 4 account access at the same time
Plug and play P2P connection
Domain name Offer DDNS freely
System Windows 10, Win98 SE/ME/2000/XP,Vista, iPhone iOS 5.0, Android 4 or above
Control protocol ONVIF 2.4, Universal agreement, enhance the interoperability of the product
Processor Hi3516C
Collection White balance Auto adjust
BLC Auto adjust
Gain control Auto adjust
SNR +/- 39dB
Lowest illumination 0.8Lux/r2.1(colourful),0.3Lux/r2.1 (black and white)
lens/view angle 3.6mm, 80°
Night vision Double filter (IR-cut) auto switching, 4pcs 850nm, 42mil infraded light, night view distance 20m
IR Double filter (IR-cut), auto switching
Video Resolution 1080P/720P/360P
Code rate VBR dynamic stream, range: 128~4096Kbps
Max frame rate 1080P@25fps, 720P@25fps, VGA@25fps
Image adjustment Brightness, contrast, saturation
Network RJ45 Supported
WiFi 802.11b/g/n
Alarm Alarm detection Motion detection
Alarm action Image via E-mail, FTP upload, Phone app alert
Storage Storage mode Local storage using up to 128GB micro-SD card, alarm pre-record or via NVR
Connection Micro SD or NVR via IP address
Physical Voltage DC 12V 3A +/- 0.3V
Power consumption Rated power: 3.5W (IR operating)
Working environment Temperature -10~50°C, humidity <90%
Material Aluminium alloy, waterproof
Weight GW: 1117g
Dimensions 245 x 200 x 200mm
Installation Wall or ceiling mount

If you need help in trying to decide what sort of camera you will require, please call us on 0207 193 5760 or E-mail

Other cameras we supply that you might find useful: