Fibre Channel to SATA RAID

Proware SB-2803F4A3 2U/8 bays, SATA II to 4Gb/s Fibre RAID array

Proware 8 disk bays rackmount SATA RAID with fibre channel interface, provides hard disk, fan and PSU fault tolerance within a small 2U package.

RAID Management
- Smart-function LCD display
- Environmental monitoring unit
- Real time drive activity and status indicators
- Browser-based Java GUI management utility

RAID Function
 - New disk auto spare
 - Host independent
 - Environment monitor
 - Online expansion
 - Continuous rebuild
 - Online consistency check
 - Failed drive auto rebuild
 - Failed drive indicators
 - Audible alarm
 - Password protection
 - E-mail notification
 - UPS connection
 - Bad block auto-remapping
 - Array Roaming
 - SNMP Protocol Support
 - Multiple RAID selection
 - Online RAID level migration
 - Background RAID initialization
 - S.M.A.R.T.

Specifications

Model	SB-2803F4A3
Form-factor	2U 19-inch rackmount chassis
RAID processor	Intel 80321 64bit RISC
RAID Level	0,1,3,5,0+1,6,JBOD
Cache memory	128MB ~ 1024MB
No. of channels (host+drive)	2 + 8
Host bus interface	FC-AL (4Gb/s)
Drive bus interface	SATA II
Data transfer rate	Up to 400MB/Sec
Back plane board	SATA II
Hot-swap drive trays	Eight (8) 1-inch trays
Power supply	300W x 2 power supplies w/PFC
Cooling fans	2
Battery backup	Option
Power requirements	AC 95V ~ 264V Full range 6A / 3A, at 115V / 230V, 47Hz~63Hz
Environmental
Relative Humidity:	10% ~ 85% Non-condensing
Operating Temp:	10°C ~ 50°C (50°F ~ 122°F)
Physical Dimensions:	88(H) x 482(W) x 650(D)mm 3.46(H) x 18.98(W) x 25.59(D)inches
Weight	13.5kgs / 29.7Lbs (without drives)

If you require pricing or information please complete our information form or email sales

Tel: +44 (0)1256 782030 : 08704 286186