SCSI - SATA RAID
Proware SB-1403ESA3 1U/4 bay
Proware 4 disk bay rackmount SATA RAID storage with Ultra 320 SCSI interface, provides hard disk fault tolerance within a small 1U package.
|
Host-to-Drive Interface
|
Configuration
|
Model
|
Form Factor
|
|
SCSI-320 to SATA-II
|
Single
|
SB-1403E-SA3
|
1u
|
RAID Management
- Smart-function LCD display
- Environmental monitoring unit
- Real time drive activity and status indicators
- Browser-based Java GUI management utility
RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- UPS connection
- Bad block auto-remapping
Specifications
|
Model
|
SB-1403E-SA3
|
|
Form-factor
|
1U 19-inch rackmount chassis
|
|
RAID processor
|
Intel 80219 64bit RISC
|
|
RAID Level
|
0,1,3,5,0+1,6,JBOD
|
|
Cache memory
|
128MB ~ 256MB
|
|
No. of channels (host+drive)
|
1 + 4
|
|
Host bus interface
|
Ultra 320 LVD
|
|
Drive bus interface
|
SATA II
|
|
Data transfer rate
|
Up to 320MB/Sec
|
|
Back plane board
|
SATA II
|
|
Hot-swap drive trays
|
Four (4) 1-inch trays
|
|
Power supply
|
250W power supply w/PFC
|
|
Cooling fans
|
1
|
|
Power requirements
|
AC 100V ~ 240V Full range 6A / 3A, at 115V / 230V, 47Hz~63Hz
|
|
Environmental
|
|
|
Relative Humidity:
|
10% ~ 85% Non-condensing
|
|
Operating Temp:
|
10°C ~ 50°C (50°F ~ 122°F)
|
|
Physical Dimensions:
|
44(H) x 449(W) x 580(D)mm 1.7(H) x 17.6(W) x 22.8(D)inches
|
|
Weight
|
12kgs / 26.4Lbs (without drives)
|
If you require pricing or information please complete our information form or email sales
Tel: +44 (0)1256 782030 : 08704 286186
|
Supports hot spare and automatic hot rebuild
