Rackmount 16 bay

Fibre Channel to SATA RAID

Proware SB-3163E-F4A3 3U/16 bays, SATA II to 4Gb/s Fibre RAID array

Proware 16 disk bays rackmount SATA RAID with fibre channel interface, provides hard disk, fan and PSU fault tolerance within a small 3U package.

Proware SB-3163E-F4A3 Fibre SATA RAID

Datasheet

Features
Supports RAID levels 0, 1, 0+1, 3, 5, 6 and JBOD
Supports hot spare and automatic hot rebuild
Allows online capacity expansion within the enclosure
Local audible event notification alarm
Supports password protection and UPS connection
Built-in serial port interface / or Ethernet for remote event
notification
Dual host channels support clustering technology
Tagged command queuing for 256 commands, allows for
overlapping data streams
Transparent data protection for all popular operating systems
RAID ADG provides the highest level of data protection
Supports multiple array enclosures per host connection
Instant availability and background initialization
Supports greater than 2TB per volume set (64-bit LBA support)
Supports 4K bytes/sector for Windows up to 16TB per volume set
Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable
drives
Supports online Array roaming
Online RAID level/stripe size migration
Online capacity expansion and RAID level migration simultaneously
Online Volume Set Expansion

Host-to-Drive Interface	Configuration	Model	Form Factor
4Gb/s Fibre to SATA-II	Single	SB-3163E-F4A3	3u

RAID Management
- The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
- The firmware-embedded SMTP manager monitors all system events and user notification automatically
- The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
- Menu-driven front panel display
- Innovative Modular architecture

RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- E-mail notification
- UPS connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level migration
- Background RAID initialization
- S.M.A.R.T.

Specifications

Model	SB-3163E-F4A3
Form-factor	3U 19-inch rackmount chassis
RAID processor	PowerPC 440SP
RAID Level	0,1,3,5,0+1,6,JBOD
Cache memory	256MB ~ 4096MB
No. of channels (host+drive)	2 + 16
Host bus interface	FC-AL 4Gb/s Fibre
Drive bus interface	SATA II
Data transfer rate	Up to 400MB/Sec
Back plane board	SATA II
Hot-swap drive trays	Sixteen (16) 1-inch trays
Power supply	460W x 2 power supplies w/PFC
Cooling fans	4
Battery backup	Option
Power requirements	AC 100V ~ 240V Full range 8A / 4A, at 115V / 230V, 47Hz~63Hz
Environmental
Relative Humidity:	10% ~ 85% Non-condensing
Operating Temp:	10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions:	133(H) x 482(W) x 600(D)mm 5.24(H) x 18.98(W) x 23.62(D)inches
Weight	20.5kgs / 45.1Lbs (without drives)

If you require pricing or information please complete our information form or email sales

Tel: +44 (0)1256 782030 : 08704 286186

[Home] [Rackmount 8 bay] [Rackmount 12 bay] [Rackmount 16 bay] [Rackmount 16 bay]