Fibre, SCSI, SAS and SATA RAID arrays from Proware

All RAID arrays provide a range of redundancy features that include all RAID levels RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, NRAID and JBOD. Redundant hot swap fans, power supplies, hard disks. Some of the RAID arrays also feature redundant dual controller cards with hot swap, 72 hour cache memory backup.

Multi host attach support is standard and depending on the model and configuration up to 12 fibre channel hosts can be connected to a single RAID array. Alternatively you can connect the arrays to a storage server and use iSCSI to serve up disk space.

RAID management is done through an intuitive GUI and shows detailed information relating to the status, configuration and reporting features.

Fibre Channel - SATA RAID ¦ SCSI - SATA RAID ¦ SCSI - SCSI RAID ¦ USB/FW RAID

Our SATA RAID arrays combine cost effective pricing and high capacity against SCSI or Fibre Channel disk based RAID arrays.

Our extensive range of disk storage arrays, comprise of various host attachments including fibre channel via direct point-to-point or through a fibre channel switch, direct attached SCSI using a SCSI controller card, iSCSI network attached through software or hardware. All models use the latest disk drives including 15,000 rpm SCSI and fibre channel disks as well as Serial ATA 7,200 rpm and 10,000 rpm drives.